Shape
Beta Marine 43hp

Technical Specifications

Power: 43 hp @ 2,800 rpm
Aspiration: Natural
Cylinders: 4
Displacement: 1999 cc
Weight: 238 kg
Propeller Guide: 18” x 12”

A general guidance for propeller size in inches, based upon 3 blade RH rotation and reduction ratio of 2:1. * For accurate individual advice please provide us with your vessels current full specifications.

 
Call us for the latest prices

Standard Specification:

RCD 2 (Recreational Craft Directive 2013/53/EU) exhaust emission compliant.
EPA (U.S Environmental Protection Agency) Tier 3 – 40 CFR 1042 exhaust emission compliant.

Mechanically governed comes with:
Keel cooled header tank and water cooled exhaust manifold.
Fresh water pump, male dry exhaust outlet & loose fuel/water separator.
Mechanical fuel lift pump, fuel and oil filtration.
Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
Special quiet air intake filter.

45 Amp, 12 Volt battery charging alternator.

Complete with ‘C Deluxe’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature, domestic and engine alternator ‘no charge; 3m interconnection cable with multi-pin plug connector.

Heavy duty engine feet and flexible mountings.

‘Morse’ type end fittings for engine speed and gearbox control.

Engine test certificate and operators manual.

5 year ‘self-service’ engine warranty, recreational use only!

Beta green paint.